Free Citrix Practice Exams  2023

Scenario: A company acquires three smaller companies which adds more than 1.500 employees to the
organization. The current Citrix ADC appliance does NOT support adding that many users.
A Citrix Administrator needs to use a multi-tenant solution, giving each newly acquired company its own
Citrix ADC for VPN access load balancing, and a minimum of 20 Gbps of throughput.
How can the administrator meet the needs of these newly acquired companies?

Which mode on a Citrix ADC can a Citrix Administrator utilize to avoid asymmetrical packet flows and
multiple route/ARP lookups?

Scenario: A Citrix Administrator is configuring load balancing on a Citrix ADC appliance for company web
servers. The administrator needs to create a custom monitor that will look for a specific keyword
response from the website, which will be used to keep services in an UP state.
Which monitor can the administrator create to meet this requirement?

Scenario: While performing a disaster recovery test, a Citrix Administrator decides to failover the Citrix
ADC high availability (HA) pair appliances. The administrator notices that the failover is NOT working as
expected, and the secondary Citrix ADC is NOT taking over as primary. The administrator suspects that
networking issues may be causing the failure.
What could be the cause of this issue?

Scenario: A Citrix Administrator currently manages a Citrix ADC environment for a growing retail
company that may soon double its business volume. A Citrix ADC MPX 5901 is currently handling web
and SSL transactions, but is close to full capacity. Due to the forecasted growth, the administrator needs
to find a cost-effective solution.
What cost-effective recommendation can the administrator provide to management to handle the
growth?

To improve page-rendering time a Citrix Administrator needs to overcome the connection limitation by
enabling client browsers to simultaneously download more resources.
What should the administrator enable while configuring the front end optimization (FEO) feature?

Scenario: A Citrix Administrator is managing a Citrix ADC SDX running eight Citrix ADC instances. The
administrator needs to upgrade the firmware on the instances. However, the administrator is concerned
that it needs to be done simultaneously.
What upgrading flexibility does SDX provide in this scenario?

Scenario: A Citrix Administrator configured a Citrix ADC active-passive, high availability (HA) pair. The HA
pair failed over and customers were unable to access hosted websites. The administrator troubleshoots
and discovers that the upstream router is NOT updating its ARP table.
What can the administrator configure to resolve this issue?

Which two options are only allowed when creating advanced policies? (Choose two.)

Scenario: A Citrix Administrator needs to create local, limited-privilege user accounts for other
administrators. The other administrators will require only:
Read-only access
The ability to enable and disable services and servers
Which built-in command policy permission level can the administrator use?

Scenario: A Citrix Administrator configured a rewrite action as follows:
> add rewrite action sync_date replace http.res.date.sys.time
What is the correct way to interpret this rewrite action?

Which setting is responsible for reducing the server load, improving response time, and increasing the
number of SSL transactions per second on an SSL vServer?

A Citrix Administrator needs to bind a URL transformation policy.
Which three bind points could the administrator use? (Choose three.)

Scenario: A Citrix Administrator installed the compression feature on the web servers. To offload the
compression on the Citrix ADC, the administrator configured the Citrix ADC appliance to remove the
‘Accept Encoding’ header from all HTTP client requests. However, the administrator observes that data
is NOT being compressed by the Citrix ADC, even though the ‘Accept Encoding’ header is being removed
from all requests.
What could be the cause of this issue?

Which profile can a Citrix Administrator create to configure a default profile that disables TLSv1?

In a global server load balancing (GSLB) active-active environment, the connection proxy is used as the
site persistence method.
What is used to source the traffic when the connection is proxied?

In an SSL offload deployment, which policy will allow a Citrix Administrator to modify all URLs in the
response body from "http://" to "https://"?

Scenario: A Citrix Administrator created and bound multiple content switching policies. During testing,
attempts to access https://cs.mycompany.com resulted in the error message below:
HTTP 503 Service Unavailable
In a Citrix ADC configuration, what can the administrator do to fix the error?

Scenario: A Citrix Administrator created and bound multiple content switching policies. During testing,
attempts to access https://cs.mycompany.com resulted in the error message below:
HTTP 503 Service Unavailable
In a Citrix ADC configuration, what can the administrator do to fix the error?

Scenario: For security reasons, a Citrix Administrator needs to block access to multiple URLs.
The administrator executes the below commands:
> add policy patset BAD_URL
> bind policy patset BAD_URL badurl1.mylab.lab -index 11 -charset ASCII
> bind policy patset BAD_URL badurl2.mylab.lab -index 10 -charset ASCII
Which final two commands should the administrator execute to accomplish this?

Which Citrix ADC feature can a Citrix Administrator employ to reuse existing TCP connections?

Which four authentication types can a Citrix Administrator use for Citrix ADC authentication,
authorization, and auditing (AAA) multifactor authentication? (Choose four.)

Scenario: A Citrix Administrator observes that when the client gets redirected to
www.citrix.com/owa/search?q=username, an HTTP 503 response is received from the content switching
vServer.
The relevant configuration is as follows:
> add cs action CS_Act_1 -targetLBVserver SERVER_1
> add cs action CS_Act_2 -targetLBVserver SERVER_2
> add cs action CS_Act_3 -targetLBVserver SERVER_3
> add cs action CS_Act_4 -targetLBVserver SERVER_4
> add cs policy CS_Pol_1 -rule "http.REQ.URL path_and_queryCONTAINS("connect")" -action CS_Act_1
> add cs policy CS_Pol_2 -rule "http.REQ.URL path_and_query EQ("owa")" -action CS_Act_2
> add cs policy CS_Pol_3 -rule "http REQ.URL path_and_query CONTAINS("owa")" -action CS_Act_3
> add cs policy CS_Pol_4 -rule "http.REQ.IS_VALID" -action CS_Act_4
> bind cs vServer CS_vserver1 -policyName CS_Pol_1 -priority 110
> bind cs vServer CS_vserver1 -policyName CS_Pol_4 -priority 120
How can the administrator correct the issue?

Scenario: A Citrix Administrator is configuring a Citrix ADC high availability (HA) pair. The administrator
needs to ensure that one Citrix ADC is UP and primary at all times to guarantee that business websites
are always available.
In the event that both nodes become unavailable or fail a health check, what does the administrator
need to do to ensure that the Citrix ADCs still handle web traffic?

Scenario: A Citrix Administrator entered the configuration below:
> add rewrite policy pol_external_to_internal
'http.req.hostname.server.eq("host_name_of_external_Web_server")' act_external_to_internal
Which two possible rewrite actions can the administrator choose when a rewrite policy evaluates to
TRUE? (Choose two.)

Scenario: A Citrix Administrator needs to integrate LDAP for Citrix ADC system administration using
current active directory (AD) groups. The administrator created the group on the Citrix ADC, exactly
matching the group name in LDAP.
What can the administrator bind to specify the permission level and complete the LDAP configuration?

When a Citrix ADC high availability (HA) pair failover occurs, by what method does the Citrix ADC
communicate to the network switches and routers that IP-to-MAC address bindings have changed?

Scenario: Users are trying to access https://cs.mycompany.com, but are receiving the error below:
HTTP 503 Service Unavailable
What can a Citrix Administrator change in the Citrix ADC configuration to fix this?

A Citrix Network Engineer informs a Citrix Administrator that a data interface used by Citrix ADC SDX is
being saturated.
Which action could the administrator take to address this bandwidth concern?

A Citrix Administrator needs to use a client’s IP address as the source IP address for Citrix ADC-to-server
connections.

Which Citrix ADC mode can the administrator use to meet this requirement?

Scenario: The primary content switching vServer has gone down. To troubleshoot, a Citrix Administrator
has issued the following command:
> show csvserver CSV
CSV (10.1.100.100:443) – HTTPS Type: CONTENT
State: UP
Last state change was at Mon Jun 29 15:20:43 2020
Time since last state change: 1 day, 06:47:58 610
Client Idle Timeout: 180 sec
Down state flush: ENABLED
Disable Primary vServer On Down: DISABLED
Appflow logging: ENABLED
Port Rewrite: DISABLED
State Update: DISABLED
Default: Content Precedence: URL
vServer IP and Port insertion: OFF
Persistence: NONE redirect: http://www.site1.com/mysite1/maintenance
Backup: vServer–LB–2
Listen Policy: NONE
IcmpResponse: PASSIVE
RHIstate: PASSIVE
Traffic Domain: 0
Based on this output, where will the subsequent request be redirected?

Scenario: A Citrix Administrator manages an environment that has three SSL websites, all serving the
same content.
www.company.com
www.company.net
www.company.org
The administrator would like to consolidate the websites into a single, load-balanced SSL vServer.
What can the administrator bind to use a single SSL vServer?

Scenario: A Citrix Administrator suspects an attack on a load-balancing vServer (IP address
192.168.100.25).
The administrator needs to restrict access to this vServer for 10 minutes.
Which Access Control List (ACL) will accomplish this?

To protect an environment against Hash DoS attacks, which two configurations can a Citrix
Administrator use to block all post requests that are larger than 10,000 bytes? (Choose two.)

Scenario: A Citrix Administrator configured SNMP to send traps to an external SNMP system. When
reviewing the messages, the administrator notices several entity UP and entity DOWN messages.
To what are these messages related?

Scenario: A Citrix Administrator would like to grant access to a Junior Citrix Administrator on the Citrix
ADC.
The administrator would like to grant full access to everything except the following:
Shell User configuration
Partition configuration
Which preexisting command policy would meet the needs of this scenario?

A Citrix Administrator needs to confirm that all client certificates presented to the authentication
vServer are valid until the year 2023.
Which expression can the administrator use to meet this requirement?

Scenario: A Citrix Administrator needs to improve website loading speed. End users are reporting slow
GIF
image rendering speeds as they scroll down a website, which affects overall page load time.
Which Citrix ADC feature can the administrator enable to improve website performance?

Scenario: A Citrix ADC is configured with Interface 1/1 and bound to VLAN 40. A Citrix Administrator
executed the below command:
> bind vlan 10 –ifnum 1/1
What is the result of executing this command on the Citrix ADC?

set gslb vServer-GSLB-1-MIR ENABLED
What will the Citrix ADC appliance send when the above command is executed?

Which two protocols would provide end-to-end data encryption, while allowing a Citrix ADC to optimize
the responses? (Choose two.)

Scenario: A Citrix ADC receives packets destined for a MAC address owned by the Citrix ADC. The
destination IP address of the packets does NOT belong to the Citrix ADC. Layer 3 mode is enabled by
default on the Citrix ADC.
The Citrix ADC will __________ the packets in this scenario. (Choose the correct option to complete the
sentence.)

Scenario: A Citrix Administrator manages an environment that has a Citrix ADC high availability (HA) pair
running on two MPX appliances. The administrator notices that the state of the secondary Citrix ADC is
‘Unknown’.
What is causing the secondary state to be ‘Unknown’?

Scenario: A load-balancing vServer is configured to utilize the least bandwidth load-balancing method. A
service attached to this vServer is brought into the effective state during production hours.
During the startup of a vServer, which load-balancing method is used by default?

Scenario: A Citrix Administrator executed the command below in an active-active, global server load
balancing (GSLB) setup.
set gslb parameter –ldnsprobeOrder DNS PING TCP
The order to calculate the _____ for dynamic proximity will be the DNS UDP query followed by the ping
and then TCP. (Choose the correct option to complete the sentence.)

Which mode does a Citrix Administrator need to configure to allow a Citrix ADC to control the
packetforwarding function based on the route table lookups?

The Citrix ADC SDX architecture allows instances to share ___________ and __________. (Choose the
two correct options to complete the sentence.)

A Citrix Administrator needs to protect the HTTP backend server type without actually removing the
header.

Which rewrite action type can the administrator apply to the Citrix ADC configuration to accomplish
this?

Scenario: A Citrix Administrator configured a responder policy as follows:
> add responder action Redirect_Act respondwith
“DIAMETER.NEW_REDIRECT(”aaa://host.example.com”)”
> add responder policy Redirect_Pol “diameter.req.avp(264).value.eq(”host1.example.net”)”
Redirect_Act
> bind lb vServer vs1 –policyName Redirect_Pol –priority 10 –type REQUEST
What will be the effect of this configuration?

Scenario: A Citrix Administrator is running an e-commerce web service that uses backend SQL and
RADIUS servers. The e-commerce platform runs on a web server using port 80, and a website status
page on port 99 reports the status of all servers.
Which monitor should the administrator choose to confirm the availability of the e-commerce solution?

Scenario: A company has three departments with proprietary applications that need to be load balanced
on a Citrix ADC. The three department managers would like to use the same IP address to access their
individual applications. This would mean configuring three load-balanced vServers, all using the same IP
address.
What can the Citrix Administrator configure for this scenario?

Scenario: The policies below are bound to a content switching vServer.
bind cs vServer vserver1 –policyName CSPOL_7 –priority 100 –gotoPriorityExpression NEXT
bind cs vServer vserver1 –policyName CSPOL_5 –priority 90
bind cs vServer vserver1 –policyName CSPOL_9 –priority 110
bind cs vServer vserver1 –policyName CSPOL_4 –priority 120
bind cs vServer vserver1 –policyName CSPOL_8 –priority 210
Policy CSPOL_7 has been invoked.
Which policy will be invoked next?

Scenario: A Citrix Administrator executed the command below:
> set httpcallout httpcallout1 –cacheForSecs 120
This command changes the cache duration of the HTTP ____________ to be set to 120 seconds. (Choose
the
correct option to complete the sentence.)

Scenario: After deploying a Citrix ADC in production, a Citrix Administrator notices that client requests
are NOT being evenly distributed among backend resources. The administrator wants to change from
the default loadbalancing method to one that will help distribute the load more evenly.
Which load-balancing method would ensure that the server with the least amount of network utilization
is receiving new connections?

Which feature can a Citrix Administrator use to create a consistent set of front-end SSL parameters
across multiple SSL vServers?

A Citrix Administrator needs to configure a rate-limiting policy setting DNS requests to a threshold of
1,000 per second.
Which command does the administrator need to run to correctly configure this policy?

Which Citrix ADC monitor can a Citrix Administrator use to check the authentication service of the Active
Directory (AD) domain controller?

Scenario: A Citrix Administrator executed the following command in a global server load balancing
(GSLB) environment:
set gslb site SiteB –triggerMonitor MEPDOWN
What will be the effect of this command on the default service monitoring behavior on a remote site?

A Citrix Administrator configured global server load balancing (GSLB) for www.citrix.com, with two ADNS
services named Citrix ADC 1 and Citrix ADC 2 in the setup.
Which record does the administrator need to add on the parent DNS server to delegate requests from
www.citrix.com to Citrix ADC 1 and Citrix ADC 2?

Scenario: While using the GUI, a Citrix ADC MPX appliance becomes unresponsive. A Citrix Administrator
needs to restart the appliance and force a core dump for analysis.
What can the administrator do to accomplish this?

A Citrix Administrator receives user complaints about latency while accessing an application that is load
balanced on the Citrix ADC.
Which tool can the administrator use to gather information regarding response time, client network
latency, and server-side processing time?

Scenario: A Citrix Administrator gives permissions to team members to access their own admin partition.
This will allow them to add resources for different departments and manage them without making
changes to the default Citrix ADC partition and configuration.
One team member typing to use the command line interface (CLI) to troubleshoot an authentication
issue could NOT use aaad.debug. However, the team member has full permissions on the admin
partition.
What can be the cause of this issue?

Which Citrix ADC Access Control List (ACL) command can a Citrix Administrator use to bridge traffic
originating from the IP address 192.168.10.200?

What is the first thing a Citrix Administrator should develop when creating a server certificate for Citrix
ADC to secure traffic?

Scenario: A Citrix ADC MPX is using one of four available 10G ports. A Citrix Administrator discovers a
traffic bottleneck at the Citrix ADC.
What can the administrator do to increase bandwidth on the Citrix ADC?

Scenario: While attempting to access web server that is load balanced by a Citrix ADC using HTTPS, a
user receives the message below.
SSL/TLS error: You have not chosen to trust “Certificate Authority” the issuer of the server’s security
certificate.
What can a Citrix Administrator do to prevent users from viewing this message?

Scenario: Client connections to certain vServers are abnormally high. A Citrix Administrator needs to be
alerted whenever the connections pass a certain threshold.
How can the administrator use Citrix Application Delivery Management (ADM) to accomplish this?

Scenario: A Citrix Administrator executed the following commands on the Citrix ADC:
> add policy dataset Admin_group ipv4
> bind policy dataset Admin_group 192.168.149.10 –index 11
> bind policy dataset Admin_group 192.168.149.39 –index 12
> bind policy Admin_group 192.168.149.49 –index 13
> add responder policy POL_1 “!(CLIENT.IP.SRC.TYPECAST_TEXT_T.CONTAINS_ANY(”Admin_group”))”
RESET
> bind lb vServer lb_vsrv_www –policyName POL_1 –priority 100 –gotoPriorityExpression END –type
REQUEST
What will be the effect of these commands?

Scenario: A Citrix Administrator made changes to a Citrix ADC, deleting parts of the configuration and
saving
some new ones. The changes caused an outage that needs to be resolved as quickly as possible. There is
no Citrix ADC backup.
What does the administrator need to do to recover the configuration quickly?

Scenario:
POLICY 1:
add rewrite action ACT_1 corrupt_http_header Accept-Encoding
add rewrite policy POL_1 HTTPS.REQ.IS_VALID ACT_1
POLICY 2:
add rewrite action ACT_2 insert_http_header Accept-Encoding “”identity””
add rewrite policy POL_2 “HTTP.REQ.IS_VALID “ ACT_2
How can a Citrix Administrator successfully bind the above rewrite policies to the load-balancing vServer
lb_vsrv so that POL_2 is evaluated after POL_2 is evaluated?

Which step can a Citrix Administrator take to use default compression policies?

Scenario: A Junior Citrix Administrator needs to create a content switching vServer on a Citrix ADC high
availability (HA) pair. The NSIP addresses are 192.168.20.10 and 192.168.20.11. The junior administrator
connects to NSIP address 192.168.20.10 and saves the changes.
The following day, a Senior Citrix Administrator tests the new content switching vServer, but it is NOT
working. The senior administrator connects to the HA pair and discovers that everything the junior
administrator configured is NOT visible.
Why has the Citrix ADC lost the newly added configurations?

Scenario: A Citrix Administrator is managing a Citrix Gateway with a standard Platform license and
remote employees in the environment. The administrator wants to increase access by 3,000 users
through the Citrix Gateway using VPN access.
Which license should the administrator recommend purchasing?

What is the effect of the “set cs vServer-CS-1 –redirectURL http://www.newdomain.com/mysite/”
command?

Scenario: The Citrix Administrator of a Linux environment needs to load balance the web servers. Due to
budget constraints, the administrator is NOT able to implement a full-scale solution.
What can the administrator purchase and install to load balance the webservers?

Scenario: A Citrix Administrator configured a global server load balancing (GSLB) setup for internal and
external users using the same host name. For internal users, cvad.citrite.net should go to the Citrix
StoreFront site; for external users, it should connect to the Citrix ADC Gateway VPN site.
Which feature should the administrator configure to accomplish this?

A Citrix Administrator is creating a new SSL vServer and notices the ns_default_ssl_profile frontend SSL
profile is automatically bound to the SSL vServer.
Which two actions can the administrator perform to change or remove the
ns_default_ssl_profile_frontend SSL
profile once it is enabled? (Choose two.)

A Citrix Administrator configured an external syslog server but is NOT seeing detailed TCP information?
What could be causing this?

Scenario: A Citrix Administrator configured Citrix ADC load balancing to send requests to one of three

identical backend servers. Each server handles multiple protocols, and load balancing is set up in round-
robin mode.

The current load-balancing setup on the Citrix ADC is:
One load-balancing vServer with one externally accessible VIP
One service created for each protocol type
One server entity for each backend resource
During business hours, the administrator wants to make changes to one backend server without
affecting the other servers.
What is the most efficient way for the administrator to ensure that all traffic is routed away from the server without impeding responses from other resources?

Scenario: A Citrix Administrator needs to configure persistence on a global server load balancing (GSLB)
vServer to which a service is bound. Service must continue to handle requests from the client even after
it is disabled manually – accepting new requests or connections only to honor persistence. After a
configured period of time, no new requests or connections are directed to the service and all existing
connections are closed.
To achieve these requirements, which parameter can the administrator configure while disabling the
service?

A Citrix Administrator needs to configure a Citrix ADC high availability (HA) pair with each Citrix ADC in a
different subnet.
What does the administrator need to do for HA to work in different subnets?

Which two policies can a Citrix Administrator configure using only the advanced policy expression?
(Choose two.)

Which two steps are necessary to configure global server load balancing (GSLB) service selection using
content switching (CS)? (Choose two.)

Scenario: A Citrix Administrator configured an authentication, authorization, and auditing (AAA) policy
to allow
users access through the Citrix ADC. The administrator bound the policy to a specific vServer.
Which policy expression will allow all users access through the vServer?

Scenario: A Citrix Administrator needs to configure a Responder policy, so that the string “/mytraining”
is added
to every URL path received.
The administrator should use these commands to accomplish this:
>add responder action Redirect_Act redirect “HTTP.REQ.URL.PATH_AND_QUERY+”mytraining”” –
responseStatusCode 302
>add responder policy Redirect_Pol___________Redirect_Act
>bind lb vServer lb_vsrv_www –policyName Redirect_Pol –priority 100 –gotoPriorityExpression END –
type_______
(Choose the correct option to complete the set of commands.)

How can a Citrix Administrator configure a rewrite policy to change the version of HTTP from 1.1 to 1.0
in every request?

Scenario: In general, it is recommended to do the following:

Use _________ if you want the Citrix ADC to reset or drop a connection based on a client or request-
based parameter.

Use _________ to redirect traffic or respond with custom messages.
Use _________ for manipulating data on HTTP requests and responses.

Scenario: A Citrix Administrator is configuring a Citrix ADC high availability (HA) pair with an existing
primary Citrix ADC with all resources configured. The administrator adds the secondary Citrix ADC in HA
and discovers that the configuration on the existing primary was removed and is now the secondary
Citrix ADC in the HA pair.
Which two configurations could the administrator have used to prevent this from happening? (Choose
two.)

Scenario: To receive data alerts for failures, a Citrix Administrator is configuring SNMP on the Citrix ADC.
The administrator is confident that the manager, alarms and SNMP traps are configured correctly. The
following week, there is a Citrix ADC-related outage and the administrator does NOT receive any alerts.
What could be the reason for this alert failure?

What can a Citrix Administrator use to restrict access to the Citrix ADC management IP (NSIP) address?

Scenario: A Citrix Administrator configured the rewrite policies below:
bind lb vServer VIP1_http -policyName POL_14 -priority 120 -gotoPriorityExpression END -type REQUEST
bind lb vServer VIP1_http -policyName POL_12 -priority 90 -gotoPriorityExpression NEXT -type REQUEST
bind lb vServer VIP1_http -policyName POL_15 -priority 100 -gotoPriorityExpression END -type REQUEST
bind lb vServer VIP1_http -policyName POL_13 -priority 101 -gotoPriorityExpression NEXT -type
REQUEST
Which policy will be evaluated last considering POL_12 is hit first?

Scenario: A Citrix Administrator configures an Access Control List (ACL) to block traffic from the IP
address 10.102.29.5:
add simpleacl rule1 DENY -srcIP 10.102 29.5
A week later the administrator discovers that the ACL is no longer present on the Citrix ADC.
What could be the reason for this?

Where do the monitor probes originate by default, after creating and correctly configuring a custom
user monitor?

set gslb parameter - GSLBSvcStateDelayTime 10
When metrics exchange protocol (MEP) is enabled what is the effect of the above command on the
global server load balancing (GSLB) environment?

A Citrix Administrator needs to block all DNS requests from subnet 10.107.149.0/24.
Which expressions can the administrator use to match the required traffic?

Which Citrix ADC platform offers an out-of-the-box multi-tenant solution?

Which log records detailed information such as statistics, metrics, and debug information in a
proprietary binary format on the Citrix ADC?

Which two items must be true for a client to connect to an SSL offload vServer without any SSL errors?
(Choose two.)

If a policy evaluates as_________________ a Citrix ADC performs the action assigned to the
____________ condition and stops further policy evaluation.

Scenario: A Citrix Administrator manages a Citrix SDX appliance with several instances configured. The
administrator needs to enable Layer 2 mode on two instances.
When using a shared network interface, what must the administrator do to ensure that traffic flows
correctly?

A Citrix Administrator needs to configure a rate-limiting policy setting DNS requests to a threshold of
1,000 per second.
Which set of commands does the administrator need to run to correctly configure and enable this
policy?

Scenario: A Citrix Administrator manages an environment that has an externally accessible website. The
administrator would like to provide end-to-end encryption and use features such as caching and
compression on the Citrix ADC.
Which setting should the administrator configure to meet this requirement?

Scenario: A Citrix Administrator is concerned about the number of health checks the Citrix ADC is
sending to backend resources. The administrator wants to find a way to remove health checks from
specific bound services.
How can the administrator accomplish this?

Users are experiencing resets from the intranet server website, which is load balanced through the Citrix
ADC.
Which Citrix ADC tool can a Citrix Administrator use to troubleshoot the reset issue?

A Citrix Administrator wants to configure independent and isolated access on a single appliance to allow
three different departments to manage and isolate their own applications.
What can the administrator configure to isolate department-level administration?

Scenario: A Citrix Administrator configured a responder policy as follows:
> add responder action Picture10Action redirect ""http://" + http.req.hostname + http.req.url +
"/picture10.html"" -bypassSafetyCheck YES
> add responder policy Picture10Policy "http.req.url.eq("/mywebsite")" Picture10Action
> bind responder global Picture10Policy 1 END -type OVERRIDE
What will be the effect of this configuration?

A Citrix Administrator notices that the Citrix ADC is sending the IP addresses of all the active services in
the DNS response.
The administrator can use the set gslb vServer __________________ parameter to change this
behavior.

If VLAN 20 is bound to the interface as tagged in an environment where Citrix ADC is configured with the
default settings, which VLANs will be bound to an interface?

Which two statements are true regarding a typical global server load balancing (GSLB) setup? (Choose
two.)

Scenario: A Citrix Administrator is required to maximize the usage of the Citrix Virtual Apps and
Desktops Site by enabling users to access the Site from external devices and reducing the cost and
the effort required to maintain the infrastructure. The desktops for the users are provisioned using
Citrix Provisioning.
Which set of resources will enable the administrator to achieve the objective?

What are three valid ways to configure Virtual Delivery Agent (VDA) registration? (Choose three.)

Which account is used by FlexCast Management Architecture (FMA) services to access the Citrix
Virtual Apps and Desktops SQL databases?

Scenario: A Lead Citrix Administrator for a large company hired a new administrator for the team to
help manage a Citrix Virtual Desktops infrastructure. The new administrator will need to manage
user sessions and power-manage machines within the Delivery Group but should NOT be able to
create any new objects.
Which role should the lead administrator create for the new administrator?

Scenario: A Citrix Administrator of a large, multi-domain company needs to configure specific Group
Policy Object (GPO) settings for Citrix Workspace app (Receiver) on managed endpoints that are in
various locations. The administrator needs to have the ability to save the GPO template file to the
Active Directory central store, so that Group Policy Administrators located in other domains can
utilize it.
Which step should the administrator take to accomplish this task?

What are three daily steps a Citrix Administrator should take to monitor a Citrix Virtual Apps and
Desktops infrastructure? (Choose three.)

Which layer can optionally be managed by Citrix Cloud, when designing Citrix Cloud architecture?

Scenario: A Citrix Administrator is in the process of creating a new machine catalog. The
administrator discovers that the option to power-manage the catalog is NOT available.
What is causing this issue?

Which three database high availability features are supported for on-premises deployments of Citrix
Virtual Apps and Desktops? (Choose three.)

Scenario: A Citrix Administrator wants to add machines to a Delivery Group. The administrator has
two machine catalogs containing unallocated machines. On the screen to choose machines from
machine catalogs, the administrator can see that only one machine catalog is available.
A possible cause of this issue is that the machines in the unavailable machine catalog are ________.
(Choose the correct option to complete the sentence.)

Which method, according to Citrix leading practices, can a Citrix Administrator use to successfully
make a configuration change for a StoreFront server group?

Which Citrix Profile Management feature maintains a backup of the NTUSER.DAT file?

Scenario: A Citrix Administrator previously configured a Citrix Virtual Desktops Site to use evaluation
licenses. The administrator then installed valid advanced licenses on the Citrix License Server and
confirmed that licenses show correctly in the licensing console. However, a user reports an issue
about logging on to the published desktop. The user receives an error message stating that the
evaluation license is about to expire.
What should the administrator do to fix this issue?

When creating a new Delegated Administrator with a custom scope, a Citrix Administrator notices
that the Full Administrator role is NOT available.
The administrator is experiencing this behavior because the custom scope _______________.
(Choose the correct option to complete the sentence.)

Scenario: A Citrix Administrator has received complaints from published application users. They
report that it takes a long time to relaunch an application after they close it by mistake.
The administrator needs a solution that will reduce application launch times in these situations.
Which feature should the administrator enable?

Which port does a Citrix Administrator need to open for Cloud Connector to communicate with the
internet?

What must a Citrix Administrator do to encrypt XML traffic between StoreFront and the Delivery
Controllers?

When users log on to Citrix Receiver, they are NOT able to see their line-of-business application by
default and are frequently calling the help desk to locate the application.
Which phrase can a Citrix Administrator add to the application properties, so that line-of-business
application is added to Favorites and users cannot remove the application from Favorites?

Scenario: A Citrix Administrator is in the process of migrating a Citrix Virtual Apps and Desktops on-
premises deployment to Citrix Cloud with an on-premises resource location. StoreFront and Citrix

ADC machines are located on premises. The administrator notices that application enumeration is
NOT occurring for resources managed by the Citrix Cloud Site.
What does the administrator need to change in order to get application enumeration working?

Which three statements are correct regarding Citrix printing? (Choose three.)

Scenario: A Citrix Administrator needs to deploy Citrix Virtual Apps. Project requirements dictate that
management and maintenance should be minimized for the administrator, while still maintaining
control of the Virtual Delivery Agent (VDA) machines.
Which hosting platform should the administrator choose to meet these requirements?

Scenario: A Citrix Administrator needs to deploy Citrix Virtual Apps. Project requirements dictate that
management and maintenance should be minimized for the administrator, while still maintaining
control of the Virtual Delivery Agent (VDA) machines.
Which hosting platform should the administrator choose to meet these requirements?

Which console can a Citrix Administrator use to provide customized permissions to a junior
administrator for adding applications?

Scenario: A Citrix Administrator configures the 'Auto connect client drives' user settings to map client
drives within the HDX session for all published desktops. The setting is configured in a Baseline
Group Policy Object (GPO) and linked to an Organizational Unit (OU) that contains all of the
published desktops.
When a user launches the desktop, client drives are NOT mapped.
What is a possible reason?

Scenario: A Citrix Administrator would like to better monitor traffic within the Citrix Gateway and
Citrix Virtual Apps and Desktops Site. The administrator decides to implement the Citrix Application
Delivery Management appliance for use with Citrix Director.
Which three additional pieces of infrastructure information can the administrator now review within
Citrix Director? (Choose three.)

Which component can optionally be hosted in Citrix Cloud or in a customer-controlled resource
location, when using the Citrix Virtual Apps and Desktops service?

Scenario: A Citrix Administrator needs to deploy 300 virtual Windows 10 desktops in an
environment. The deployment should have a low impact on the existing network infrastructure. The
environment also requires user-installed applications and persistency.
Which Citrix technology can the administrator use to provision the desktops?

Which two statements are valid when using Citrix Profile Streaming? (Choose two.)

A user complains to a Citrix Administrator that application load time is long when they log on at the
beginning of the work day.
Which feature can the administrator enable to reduce the perceived start time of the user's
application?

Scenario: A Citrix Administrator needs to power-manage a group of Server OS Virtual Delivery Agent
(VDA) machines that are all in the same Delivery Group. The administrator needs all the machines to
be restarted once a week during the weekend. Additionally, a subset of the machines should be
restarted every day during non-peak hours.
Which feature must the administrator change from the default values in order to fulfill the
requirements?

Scenario: A Citrix Administrator received reports from users regarding published applications
freezing and crashing randomly within their Virtual Delivery Agent (VDA) machine sessions. The
administrator would like to review the history of applications that have crashed recently.
Which step can the administrator take to gather the necessary information from within Citrix
Director?

Which three policy settings can a Citrix Administrator configure to improve HDX session performance
for high-latency, low bandwidth user connections? (Choose three.)

Scenario: A Citrix Administrator needs to review the current state of specific machine sessions and
application instances that are running in a Citrix Virtual Apps and Desktops Site. The administrator
also needs to power-manage sessions. The Site is a premium licensed Site.
Where should the administrator navigate to within Citrix Director to obtain this information?

Which step does a Citrix Administrator need to take to enable Citrix XML Service trust for user access
within a Citrix Virtual Apps and Desktops infrastructure?

Which tool should a Citrix Administrator use to monitor the overall daily performance of a Citrix
Virtual Apps and Desktops Site?

Scenario: A Citrix Administrator has deployed a Citrix Cloud-managed Citrix Virtual Apps and
Desktops Site with one on-premises resource location and two Cloud Connectors. An on-premises
StoreFront server group is used to access published resources. During user acceptance testing, due to
adverse weather conditions, network connectivity between the on-premises location and Citrix
Cloud was broken for several hours.
Which statement describes what will occur in this scenario?

Scenario: A Citrix Administrator ran the Get-BrokerSite PowerShell command on the primary Delivery
Controller to obtain overview information of the infrastructure.
The administrator received the error as shown in the exhibit.
Click on the Exhibit button to view the error.

Why did the administrator receive this PowerShell error?
A. The Get-BrokerSite PowerShell command was performed with a syntax error.

For which three components can Citrix Director capture utilization statistics? (Choose three.)

What is the minimum built-in delegated administration role required to create an Application Group?

After creating a new machine catalog using the Machine Creation Services (MCS) wizard in Citrix
Studio, a Citrix Administrator determines that Windows activation fails for all new machines in that
catalog.
Which two conditions can cause this to happen? (Choose two.)

On which two components must the Secure Ticket Authority (STA) server locations be configured if a
Citrix Administrator wants to configure secure external access to a Citrix Virtual Apps and Desktops
Site? (Choose two.)

A Citrix Administrator is in the process of installing Citrix Cloud Connector, but the installation fails.
What could be causing the Citrix Cloud Connector installation to fail on the machine?

A user calls the help desk and states that launching a pooled random desktop takes as long as five
minutes.
Which Citrix Director report can a Citrix Administrator review to find out what might be causing the
delay?

Scenario: A Citrix Administrator is configuring the Workspace Experience to provide users with access
to their applications and desktops. The administrator deployed Microsoft Azure Active Directory (AD)
already and wants to leverage it to support user access to the Workspace Experience.
Which two steps does the administrator need to take to enable users to authenticate using Azure AD
to the Workspace Experience? (Choose two.)

How can a Citrix Administrator enable the ability to monitor application failures for Desktop OS
machines running the Virtual Delivery Agent (VDA)?

Scenario: A Citrix Administrator is working on a published application. The network connection
remains active for 240 seconds but is interrupted and applications become unusable. The session
then prompts for authentication. After the administrator successfully authenticates, the session is
reconnected.
Which policy makes this possible?

Scenario: A Citrix Administrator has deployed machines using Machine Creation Services (MCS). A
user logs on to a desktop from a random/non-persistent pool of Windows 10 desktops. During the
session, the user installs Microsoft Office 2016.
To which disk is the Microsoft Office installation data written during the session?

How can a Citrix Administrator guarantee the availability of resource locations in a Citrix Cloud
deployment?

Which three Citrix Virtual Desktops Site components are managed by Citrix, when using Citrix Cloud
as the hosting platform? (Choose three.)

Scenario: A Citrix Administrator has been advised that additional Windows users will need to access
the on-premises Citrix Virtual Apps and Desktop Site. The Site utilizes Citrix Profile Management for
all users. The new users have been using Windows Roaming Profiles and will need their existing
profile information when they use the Citrix Site. The administrator enables the Profile Management
policy setting for 'Enable Migration of Existing Profiles'.
At which stage will the new users' Roaming Profiles be migrated to the existing Profile Management
store?

Scenario: Users report that they are receiving new sessions instead of reconnecting to their
disconnected sessions. A Citrix Administrator investigates the issues and finds the sessions are in a
disconnected state when the users leave work.
What should the administrator configure to allow the users to reconnect to their disconnected
sessions while roaming?

Which PowerShell command should a Citrix Administrator run to obtain the name of a deployment,
the local host cache configuration and the license level?

Scenario: A Citrix Administrator is enabling TLS Secure connections between the Cloud Connectors
and on-premises StoreFront. After configuring the TLS certificate on all Cloud Connectors and
disabling HTTP connections, the administrator finds that no resources are being enumerated.

Which extra step does the administrator need to take to allow enumeration to work between on-
premises StoreFront and Citrix Cloud?

Scenario: A Citrix Administrator has enabled an HDX Session printers policy within a Citrix Virtual
Apps and Desktops Site. The administrator added a printer to a print server and assigned the printer
to all users through a session printer policy. In addition, several local client printers are auto-created
within HDX sessions. No other printing policies are configured.
How will print jobs be routed when users send print jobs to a printer managed by the print server?

Scenario: A Citrix Administrator needs to reduce costs by limiting users' printing sources. The
administrator needs to stop automatic creation of all client printers in a session and map printers
based on the floor of the building from which the user's session connects.
Which two policies should the administrator configure to complete this task? (Choose two.)

Which three methods can a Citrix Administrator choose from when creating a Featured App Group
for a set of applications? (Choose three.)

Which tool should a Citrix Administrator use when a user reports “event ID 1022: The Citrix Desktop
Service Failed to register with any controller”?

A user calls the help desk to report that when launching any application from within their published
desktop session, it takes a long time and the overall performance is poor.
Which Citrix Director report can a Citrix Administrator use to initiate the investigation of the issue?

Which two features within Citrix Director can a Citrix Administrator use to view historical resource
utilization for a machine running the Virtual Delivery Agent (VDA)? (Choose two.)

Which tool can a Citrix Administrator use to collect information to investigate issues with session
performance?

Which PowerShell command can be used to display all the Citrix services installed on the Delivery
Controller?

Which tool can a Citrix Engineer use as a first step in reviewing issues with Virtual Delivery Agent
(VDA) session launch status?

Scenario: A Citrix Engineer is working on a StoreFront subscription synchronization issue in an
existing Citrix Virtual Apps and Desktops environment. One StoreFront server is in the New York
datacenter and another in the San Francisco datacenter. The servers are NOT in the same group. The
engineer has run all the required PowerShell commands on both StoreFront servers.
In which local Windows user group of each StoreFront server should the engineer add the Microsoft
Active Directory domain machine accounts?

Which two FlexCast Management Architecture (FMA) services will have an additional connection to a
secondary database apart from having a connection with the Site database? (Choose two.)

How often should a Citrix Engineer backup the Citrix database, based on Citrix recommendations?

A Citrix Engineer needs to return an environment back to normal operations after a Disaster
Recovery (DR) occurred.
Which two tasks does Citrix recommend to move the users from the backup datacenter to the
primary datacenter? (Choose two.)

Which two components directly communicate with each other during the process of resource launch,
when Federated Authentication Service (FAS) is used? (Choose two.)

Scenario: A Citrix user is accessing a Windows 10 VDI machine using a personal laptop. The VDI is
becoming unregistered frequently, which is making it difficult for the user to access it. In order to troubleshoot the issue, a Citrix Engineer is assigned to collect CDF logs.
On which two components should the engineer run Citrix Diagnostic Facility (CDF) control to capture
the required logs? (Choose two.)

Which two statements are true regarding the Citrix App Layering Management Console? (Choose
two.)

Which two components are hosted in Citrix Cloud when using Workspace Environment Management
(WEM) service? (Choose two.)

Scenario: A Citrix Engineer is working on a Citrix Virtual Apps and Desktops deployment. The
engineer is considering implementation of a multi-zone site instead of multiple sites.
Which three benefits of zones can help the engineer to support this decision? (Choose three.)

A Citrix Engineer wants to setup multi-site configurations, grouping Citrix Virtual Apps and Desktops
deployments that deliver the same desktop or application so that identical resources can be
aggregated for users.
What are two considerations regarding resources that the engineer needs to consider before setting
up multi- site configuration? (Choose two.)

Which statement is true regarding Citrix Workspace Environment Management (WEM) Agent?

Scenario: A Citrix Engineer is deploying a Citrix Virtual Apps and Desktops environment. The
engineer noticed some Virtual Delivery Agent (VDA) machines are having registration issues.
Which three items should the engineer review within the company infrastructure to determine the
root cause of the issue? (Choose three.)

Which two statements are valid when designing a Citrix Cloud Disaster Recovery plan? (Choose two.)

Which component must a Citrix Engineer use to configure security settings on User Layer folders?

What is the first step in the migration process of an on-premises Workspace Environment
Management (WEM) environment that is currently in production to a WEM Citrix Cloud service?

In which two situations should a Citrix Engineer consider using Elastic App Layers? (Choose two.)

Scenario: A Citrix Engineer is maintaining a Citrix Virtual Apps and Desktops environment and has
deployed Workspace Environment Management (WEM) within the infrastructure to provide
resources to users in their sessions. The engineer initially deployed a Network Printer and it is
working correctly for all users in their sessions. Recently, the engineer added a second resource, a
Network Share Drive, and users are reporting that it is never available in their sessions.
The engineer verified the Action for this Network Share Drive to ensure it is correctly configured, and
the required Conditions are listed under the WEM Filters node. The Everyone group has already been
added to the Assignments node within the WEM console.

What should the engineer enable from the Advanced Settings node to correct this issue?

Which two statements are valid regarding communication of Flexcast Management Architecture
(FMA) services with the database? (Choose two.)

Which two statements are true regarding the Application Security feature of Workspace Environment
Management (WEM)? (Choose two.)

Scenario: A Citrix Engineer is managing Virtual Delivery Agent (VDA) registrations in a Citrix Virtual
Apps and Desktops environment.
In which two types of deployments will the auto-update policy for VDA registration be self-managed?
(Choose two.)

Scenario: A Citrix Engineer needs to make a change to the OS Layer. The OS Layer is currently used in
several layered images that include different application layers.
Which two steps should the engineer take to make the necessary changes to the OS Layer and the
layered images while minimizing administrative effort? (Choose two.)

Scenario: A Citrix Engineer administering a Citrix Virtual Apps and Desktops environment is
experiencing inconsistency with Virtual Delivery Agent (VDA) registration. After much investigation,
the engineer determined the issue is resulting from intermittent problems with the Windows
services on the VDA machine and the Delivery Controller.

Which set of Citrix services should the engineer troubleshoot to find the root cause?

Scenario: A Citrix Engineer needs to integrate the current Citrix Gateway with the StoreFront servers.
During the wizard setup, the engineer was asked to add two Secure Ticket Authority (STA) servers as
Citrix leading practice for high availability.
The engineer should add two servers as STA servers to accomplish this.

What does a Citrix Engineer need to know when adding a new StoreFront server, in terms of
StoreFront scalability?